[Support request] Flushing

  • May 17, 2021 at 11:28 am #830
    Kat
    Participant

    When flushing to eliminate excess nutrient salt build up I use flash clean from GHE. My concern is that the ‘flushed water’ will be re-absorbed by the plant as the water stays in the tray of the autopot system. Should I be vacuuming the ‘flush water’ out of the trays?

    May 17, 2021 at 11:31 am #832
    Josh
    Keymaster

    AutoPot does not require you to flush through the top of the plant unless under extreme circumstances….. All you need to do is fill the reservoir with pH correct plain water 10-14 days prior to harvest and the plants will naturally absorb any nutrient in the substrate and then begin to lose their colour

    June 23, 2021 at 10:34 am #864
    TheSTRAFF
    Participant

    I have used Flashclean as a normal watering. for me it worked the same as flushing the medium with plain water. except that the water usage is alot less, i used about 6lts of water mixed with flashclean, compared to 40ltrs of plain water flushing. i will be doing Flashclean at 25% dosage in the tank when I do eventual flush using the Autopot system.

    April 25, 2022 at 4:21 pm #1038
    Robertjmarkham
    Participant

    I am going to flush with ph water starting today. I don’t want to loose the 16 plants I have growing in the autopots. It’s been very disheartening seeing these plants struggle because of my ignorance. Should not start a major change like this is a room with other 5 gallon pots. I am in week 5 off flower and the plants in autopots are not flowering yet??????

You must be logged in to reply to this topic.