Josh

Forum Replies Created

  • In reply to: Flushing

    May 17, 2021 at 11:31 am #832
    Josh
    Keymaster

    AutoPot does not require you to flush through the top of the plant unless under extreme circumstances….. All you need to do is fill the reservoir with pH correct plain water 10-14 days prior to harvest and the plants will naturally absorb any nutrient in the substrate and then begin to lose their colour

    In reply to: Nutrient Line

    May 16, 2021 at 12:41 pm #829
    Josh
    Keymaster

    Hi GHE 3 part work great with AutoPot, no need to add any additional bottles…. boosters or additives…..

    In reply to: what is the flexitank made of?

    May 16, 2021 at 12:39 pm #827
    Josh
    Keymaster

    Hi They are made of PVC, try using a bicycle repair kit and apply the patches inside and out.

    In reply to: Can the pots be at a higher level than the water tank?

    May 16, 2021 at 12:38 pm #825
    Josh
    Keymaster

    Hi Emma,

    Unfortunately not as all our systems are gravity fed.

    In reply to: Does the Spring Pot system need to use AirDome?

    April 26, 2021 at 10:49 am #819
    Josh
    Keymaster

    Hi …. it really is up to the grow if they wish to use the AirDome in the fabric pots….. if you do decide to use it ensure a suitable blend of free draining substrates is used….. please take a look at the catalogue on the official AutoPot website for further information.

    Regards Josh

    In reply to: stop flooding

    April 22, 2021 at 2:00 pm #816
    Josh
    Keymaster

    It also depends which country you are in…. please let me know because I’m based in the UK…..

    In reply to: stop flooding

    April 22, 2021 at 1:59 pm #815
    Josh
    Keymaster

    Hi…. please feel free to call me on my mobile and I’ll help you out 07973139649

    Cheers Jason

    In reply to: Attach water pump to the bottom tap reservoir

    April 19, 2021 at 10:37 am #812
    Josh
    Keymaster

    Hi There…. Have you tried sourcing a suitable diameter pipe what will fit in the outlet hole, you may need to use some fittings such as elbows so that the pump sits properly on the inside base of the reservoir.

    In reply to: Wrong kit sent.

    April 19, 2021 at 10:35 am #810
    Josh
    Keymaster

    Hi Dan, Please contact orders@autopot.co.uk with your order number and someone there will help you out.

    In reply to: Falling on my face with dying plants

    April 6, 2021 at 12:51 pm #805
    Josh
    Keymaster

    Hi Anthony,

    I believe by reading your email that you could be in the US, if so please contact the US company at http://www.autopot-usa.com, if Canada please contact http://www.autopot-canada.ca or the UK http://www.autopot.co.uk and someone local to you will be able to assist

    Regards
    Josh

    In reply to: Spring Pot System

    March 28, 2021 at 2:43 pm #801
    Josh
    Keymaster

    Hi There,

    If you wish to change the configuration of the system we have fittings available in the fittings section on the website, so you can easily choose the fitting or fittings you require to easily alter the layout.

    In reply to: 1/2 yellow 1/2 perfect IN FLOWER!

    March 1, 2021 at 2:36 pm #790
    Josh
    Keymaster

    Hi, Which country are you in, if the US or Canada please have a chat with either AutoPot USA or AutoPot Canada, if in the UK or Europe please email mail@autopot.co.uk with your contact number and someone will call you and help you out.

    In reply to: Dosatron

    March 1, 2021 at 2:33 pm #789
    Josh
    Keymaster

    Hi Luke,

    Unfortunately the Dosatron is not compatible with the AutoPot technology, as they work in completely different ways. A better solution is to have a dosing machine before the reservoir with a ballcock/floatvalve in the reservoir, you will then have water and nutrients automatically dosed and filling the reservoir, gravity pressure from the reservoir will then supply the water to the AutoPot modules.

    In reply to: First time use – Overflowing Trays/Valves

    March 1, 2021 at 2:30 pm #787
    Josh
    Keymaster

    Hi There, if you are in the US please have a chat with the chaps at http://www.autopot-usa.com they should be able to assist you further as I am based in the UK. Any further problems or you don’t receive the help you need please let me know. Please ensure that you have firmly pushed the AQUAvalve onto the Tee’s in the trays too.

    In reply to: 1/2 yellow 1/2 perfect IN FLOWER!

    February 23, 2021 at 6:12 pm #782
    Josh
    Keymaster

    Hi PATC

    If all the set up is the same I can only suggest that there is an environmental issue in there….. If you send an email to jrs@autopot.co.uk with your number someone from the appropriate country will give you a call to help out.